Beaverton Bathroom Remodeling

What actually goes into a bathroom that lasts

A bathroom is the most complicated room in the house per square foot — plumbing, waterproofing, ventilation, and tile all meeting in a few feet. JDI Construction is a family-owned, Vancouver-based design-build remodeler, and that complexity is exactly why we think of a bathroom as two projects at once: the layout and finishes you use every day, and the waterproofing, ventilation, and plumbing you never see. Get both right and a Beaverton bathroom looks good and holds up; get only the first right and you're back to bare studs in a few years. We've remodeled enough baths across Washington County to know where the shortcuts come back to bite, and we plan around them from the start.

Our designers and installers work as one team, so the bathroom you approve is the bathroom that gets built — we don't hand finished plans to a separate contractor and hope it translates. The person who drew your layout is standing in the room while it's installed.

The parts that matter most

Per square foot, a bathroom asks more of the people building it than any other room in the house. These are the details that decide whether the result lasts, and where doing it right actually shows:

A few decisions worth making early

Some choices are much cheaper to make on paper than mid-demolition, so we like to settle them before the first wall comes down. Whether to keep the tub or convert to a walk-in shower is often the biggest one — plenty of Beaverton homes have a tub that hasn't held water in years, and that footprint usually becomes a far better shower, though a household with young kids may want to keep at least one tub. Whether to go curbless is the next: a zero-threshold shower reads clean and stays easy to step into as you age in the home, but it needs the floor framing planned for it, not retrofitted. And whether to move plumbing is the one with the clearest price tag — leaving the toilet and drain where they are keeps costs down, while relocating them means opening floors and walls. We lay these trade-offs out plainly so you're deciding with the numbers in front of you, not discovering them halfway through.

What Beaverton homes tend to need

Beaverton is really two housing eras sharing a zip code, and the bathrooms show it. The mid-century ranches that fill the older neighborhoods tend to have compact, original baths — a single tub-shower, a small vanity, and pipes that have been in the walls for decades. There the work is about making a modest footprint feel generous: better fixture spacing, a walk-in shower where the tub used to sit, and updated supply lines while everything's open.

Out toward the Sunset Corridor and the newer subdivisions that grew up with the tech economy, the homes are bigger but the primary baths often came builder-grade — a large room that never got the finish level the rest of the house did. There the job is turning a generic layout into a real suite: a proper walk-in shower, a vanity built for two, and storage that clears the counter for good. In both cases, the wet Pacific Northwest climate is why we treat waterproofing and ventilation as the non-negotiables that protect everything else you paid for.

Bathrooms we've remodeled around Beaverton

A few recent projects near Beaverton — click through to see the full before-and-after:

Beaverton

Bright and Airy Bathroom Transformation in Beaverton, OR

See the project

Beaverton

Forest Green Kitchen and Bath Remodel in Beaverton, OR

See the project

Portland · Nearby

Bathroom Renovation in Portland, OR

See the project

Portland · Nearby

Vintage-Modern Bathroom Remodel in Portland, OR

See the project

What does a bathroom remodel cost in Beaverton?

What a Beaverton bathroom costs comes down to how much you're changing, not the address. Keeping the existing layout and refreshing the surfaces sits at one end; moving plumbing, converting a tub to a walk-in shower, adding a double vanity, heated floors, and custom tile sits at the other. A hall or guest bath is a smaller project than a full primary suite, and an older mid-century home can add a little scope once the walls are open. Because our design and our trades are both in-house, we can steer the plan toward the choices that matter to you and pull back where they don't — and you get an itemized estimate after we've actually seen the room, so the number reflects your bathroom rather than an average.

How long does a bathroom remodel take?

Most bathroom remodels run a few weeks once your materials are selected, with a full primary bath taking longer than a straightforward hall bath. The bigger variables are how much plumbing moves and whether anything unexpected turns up behind the walls of an older Beaverton home. We give you a realistic schedule before demolition starts, pull the permits the work requires, and plan the sequence to keep a bathroom usable wherever the layout allows.

Why homeowners in Beaverton choose JDI

Design-build means one team is accountable for the whole project — the layout, the plumbing, the tile, and the finish — so your design is never drawn by one company and handed off to trades who never saw the plan. We handle the permitting, coordinate every trade in the right order, keep you updated through our client portal instead of leaving you guessing, and stand behind the work with a five-year workmanship warranty. We're based across the river in Vancouver, but Beaverton is a short drive, close enough for us to stay responsive during the project and long after it wraps.

JDI Construction — "Built by family. Trusted by neighbors." Design-build remodeling based in downtown Vancouver, WA, serving Beaverton and the greater Portland–Vancouver metro since 2007.