Skip to main content

Bathroom Remodel Cost in Vancouver, WA (2026)

By the JDI Construction teamReviewed by Arthur Kulchitskiy, Project Consultant, and Denise Lacquement, Designer (bathroom specialist)Updated October 20266 min read

Quick answer

JDI Construction's published planning ranges for a bathroom remodel in Vancouver, WA run from $9,000-$16,000 for an Essential powder room to $98,000-$185,000 for a Luxury primary suite. A full hall bath runs $20,000-$32,000 at Essential, $32,000-$58,000 at Signature and $58,000-$95,000 at Luxury. Sales tax (8.9% inside Vancouver city limits) and permit fees come on top. These are planning ranges, not quotes.

Nobody can price your bathroom honestly before seeing it, but you can plan with real ranges. The figures on this page are the planning ranges JDI Construction publishes in its bathroom cost calculator, sorted by the type of bathroom and the finish tier. They are before sales tax, and they are planning ranges, not quotes. Below them you will find what pushes a project up or down, and the tax and permit fees that sit on top.

JDI planning ranges by bathroom type and tier

Pick the row that matches the room, then read across to the tier that sounds like the bathroom you want.

Bathroom typeEssentialSignatureLuxury
Half bath or powder room (toilet and vanity, no shower or tub)$9,000-$16,000$16,000-$26,000$26,000-$42,000
Full or hall bath (toilet, vanity, tub or shower)$20,000-$32,000$32,000-$58,000$58,000-$95,000
Primary suite (double vanity, soaking tub, walk-in shower)$38,000-$58,000$58,000-$98,000$98,000-$185,000

JDI Construction planning ranges from its public cost calculator, before Washington sales tax. Not a quote or an offer.

What a planning range includes

Each range covers design, drawings, permits, demolition, cabinetry, counters, tile, waterproofing, plumbing, electrical, lighting, fixtures and the finished install. It does not include unexpected structural repair found once walls and floors are open. JDI handles that by written change order, so you see the cost before the work is done.

What the three tiers mean

  • Essential: an updated layout, mid-grade materials and standard cabinetry.
  • Signature: custom-built cabinetry, premium quartz or tile, and name-brand fixtures.
  • Luxury: fully custom millwork, high-end stone and designer finishes.

The tier describes the finish level. It does not describe how much construction the room needs. For a plain-language breakdown of cosmetic, pull-and-replace and full gut scopes, see bathroom remodel levels.

Add-on ranges

These are the features that most often lift a bathroom within its range, or past it. The calculator prices them separately.

Add-onJDI planning range
Walk-in or curbless shower$4,000-$10,000
Double vanity$3,000-$8,000
Heated tile floor$2,000-$5,000
Freestanding soaking tub$2,500-$6,500
Steam shower system$8,000-$15,000
Custom tile pattern or inlay$3,000-$9,000
Smart lighting or fixtures$1,500-$4,000
Full wet-room build$6,000-$14,000

JDI Construction planning ranges, before sales tax. Not a quote.

What moves a bathroom up a tier, or within one

Two bathrooms of the same type can land far apart. A move up a tier comes from finishes. A move within a tier usually comes from construction.

Finishes that change the tier

Swapping a standard vanity for a custom-built one, moving from mid-grade tile to premium tile or quartz, and choosing name-brand fixtures is the step from Essential to Signature. Fully custom millwork, high-end stone and designer finishes are the step to Luxury. A practical way to find your tier is to choose the vanity and the shower wall material first, because those two decisions set the tone for everything else.

Whether the plumbing stays where it is

Keeping the toilet, vanity and shower drain in their current locations is the single biggest way to control cost. Moving a drain means opening the floor, rerouting and venting, and more inspections. The page on moving bathroom plumbing explains what is involved.

The shower itself

A tiled shower built in place has more labor in it than any other part of the room: framing, a sloped floor, waterproofing, tile and glass made to measure. A curbless floor adds framing work below the tile. Shower remodel cost goes through each driver.

What is behind the walls

Bathrooms hide leaks. Rotted subfloor under a toilet or framing behind an old tub surround shows up only at demolition, and it is the one cost the planning range does not cover. Hidden water damage lists the warning signs to look for now.

Sales tax comes on top

In Washington, remodeling for a homeowner is a retail sale. Under WAC 458-20-170 the contractor collects sales tax on the full contract price, labor included, and the Department of Revenue sources construction to the job site. For October 1 to December 31, 2026, the Department of Revenue lists 8.9% for the City of Vancouver (location code 0605), and 8.0% (code 0600) or 8.7% (code 0666) for unincorporated Clark County. Camas is 8.8%, Battle Ground and Washougal 8.9%, and Ridgefield 9.0%. Rates change quarterly. The kitchen guide's page on sales tax on remodeling explains how to look up your address and what the tax adds to a range.

Permit fees on top

Permit fees are official figures, so they can be quoted exactly. Which ones apply depends on where you live and what the work touches. The page on whether you need a permit covers the rules.

Inside Vancouver city limits

The City bases building permit fees on project valuation, the fair market value of labor and materials. A remodel that involves two or more codes, such as building plus plumbing and electrical, is a "Single Permit": 160% of the building-only fee, with plan review at 50% of that Single Permit fee. The 2026 valuation table (Table I) reads:

Total valuationBuilding-only fee (2026)
$1 to $500$30.93
$501 to $2,000$30.93 plus $4.01 per additional $100
$2,001 to $25,000$91.17 plus $18.43 per additional $1,000
$25,001 to $50,000$515.55 plus $13.28 per additional $1,000
$50,001 to $100,000$847.99 plus $9.21 per additional $1,000
$100,001 to $500,000$1,308.37 plus $7.35 per additional $1,000

The City adds a $32.00 issuance fee for a residential building permit and a $6.50 state building fee, effective January 1, 2026, and says fees are subject to annual increase on the first of the year. Card payments carry a 2.65% processing fee.

Small stand-alone trade jobs use per-item fees instead. The City's 2026 schedule lists $15.14 each for a water closet, a sink or lavatory, and a tub, shower or shower pan, with a plumbing minimum of $78.99. Electrical is $63.18 for 1 to 4 circuits and $7.25 for each additional circuit. Each trade permit includes a maximum of two inspections, and each extra inspection is $49.00.

Unincorporated Clark County

Clark County's residential plumbing application lists a $94.00 issuance fee, $192.00 for 1 to 5 fixtures or traps and $35.00 for each fixture after that, and $122.00 to alter drainage or water pipe. The county does not issue electrical permits; outside Vancouver city limits those come from the Washington Department of Labor & Industries. See permits outside city limits.

From a range to a firm number

A range tells you whether the project is feasible and which tier to design toward. A firm number needs a site visit, a drawn layout, your selections or stated allowances, and a written scope that lists what is included and excluded. Where the money goes breaks a bathroom budget into its categories, and how to save without regretting it shows where to cut.

JDI Construction is a family-owned design-build remodeler in Vancouver, so one team designs and builds the bathroom. A free in-home consultation is followed by an itemized plan and a 3D design layout, and a firm written quote typically within a week of the visit. Permits and project management are handled for you. Read more about bathroom remodeling in Vancouver, see financing options, or request a consultation.

Common questions

Is a shower-only remodel cheaper than the full bath range?

Usually it is a smaller scope, but JDI's calculator does not publish a separate shower-only range. It prices bathrooms by room type and lists shower upgrades, such as a walk-in or curbless shower, as add-ons. The shower remodel cost page explains what drives a shower budget.

What is not included in JDI's bathroom planning ranges?

The ranges cover design, drawings, permits, demolition, cabinetry, counters, tile, waterproofing, plumbing, electrical, lighting, fixtures and the finished install. They do not include unexpected structural repair found inside walls, such as rotted framing under a leaking shower, which JDI handles by written change order. Sales tax is also on top.

How quickly can I get a firm price?

After a free in-home visit, JDI sends a firm written quote, typically within a week of the visit. A firm price needs measurements, a look at the plumbing, wiring and subfloor, and your selections or stated allowances.

Do Camas, Battle Ground or Ridgefield cost more than Vancouver?

JDI publishes one set of planning ranges for its service area. What changes with the address is the sales tax rate set by the Washington Department of Revenue and the office that issues permits, with its own fee schedule. Check both for your address before comparing totals.

How current are these ranges?

They are the ranges in JDI's public bathroom cost calculator as of October 2026. Labor and material conditions change, so use the calculator for current figures and treat this page as a planning starting point.

Keep going