Vancouver Whole House Remodeling

Remodeling a whole house, planned as one project

The biggest question in a whole-house remodel usually isn't the finishes — it's whether to live through it or move out while we work. JDI Construction is a family-owned, Vancouver-based design-build remodeler, and we treat a project this size as what it really is: a series of connected projects run on one schedule, under one design vision, by one team that answers for the layout, the systems behind the walls, and every finish. It's also the one moment when it's genuinely efficient to fix the bones of the house — the electrical panel, the plumbing, the insulation — all while the walls are already open. In Vancouver that matters, because the Clark County seat holds everything from older Hough and Shumway-era homes near the core to newer construction out in Cascade Park and east Vancouver, and each asks for a different plan.

Because our designers and our installers are one team, the home you sign off on in the drawings is the home that actually gets built. We don't hand a plan set to a separate contractor and hope the pieces line up on site. Here's what a whole-house project covers, what tends to surface in Vancouver homes, and what to expect on cost and timeline.

The parts that matter most

Some of the most important work in a whole-house remodel never shows up in a photo. These are the pieces we plan first, because they're what the finished home rests on:

A few decisions worth making early

The choices that set a whole-house budget and schedule are best settled before anyone swings a hammer. The first is whether you'll live through it or move out — staying put keeps costs down but means living around active work, and we sequence the job to keep parts of the house usable either way. From there: how much of the layout and structure you want to change, since moving or removing walls opens a home up but brings engineering and load-path work with it; which systems to fold in now, because re-piping, rewiring, upgrading the panel, or swapping out HVAC is far cheaper while the walls are open than as a separate trip back later; and whether to tackle everything at once or phase it over time. We put these trade-offs on the table early so the plan fits both how you live and what you intend to spend.

What Vancouver whole-house projects tend to involve

In the older neighborhoods closer to central Vancouver — the Hough and Shumway-era streets and the homes that grew up around them — a whole-house remodel usually means opening up a chopped-up original floor plan and dragging the mechanicals into the present. Knob-and-tube wiring, undersized and crowded panels, galvanized or aging supply lines, and thin attic insulation all get addressed while the walls are open, so the house keeps its character but finally performs like a modern one.

Out in east Vancouver and around Cascade Park, the newer and larger homes are more often about reconfiguring for the way a household actually lives now — reworking an entire level, and replacing builder-grade finishes throughout so the kitchen, primary suite, and living spaces read as one cohesive design rather than a series of separate updates. Either way, in the damp Pacific Northwest we fold insulation, moisture control, and ventilation into the scope, because a whole-house project is the right time to get them right.

Whole-home remodels we've done around Vancouver

A few recent whole-home projects near Vancouver — click through for the full before-and-after:

Vancouver, WA

Mid-Century Modern Whole-Home Remodel

See the project

Vancouver, WA

Complete Home Renovation for Retirement in Vancouver, WA

See the project

Vancouver, WA

Mid-Century Ranch Exterior Refresh in Vancouver, WA

See the project

Vancouver, WA

Whole-Home Remodel in Vancouver, WA

See the project

What does a whole-house remodel cost in Vancouver?

Whole-house cost is driven by scope before anything else: how many rooms are in play, how much of the layout and structure changes, and which systems you update along the way. Square footage matters, but so does the age of the home — an older home near central Vancouver is more likely to turn up wiring, plumbing, or framing that should be corrected while the walls are open, which is precisely why we carry a contingency in the budget for hidden conditions. Finish level is the other major lever, from clean and durable to fully custom throughout. Because our design and our trades are both in-house, we can plan the entire project against one realistic number and show you where each decision lands, instead of pricing it piecemeal after the fact.

How long does a whole-house remodel take?

A whole-house remodel is measured in months, not weeks, and the timeline follows scope, structural work, and how much of the home is touched at once. We give you a realistic schedule before demolition, pull and coordinate the permits the work requires, and run the trades in the order they have to go — demo, then structural, then rough-ins, insulation, drywall, and finally finishes. Where it makes sense, we phase the work so you can keep living in part of the home while the rest is underway.

Why homeowners in Vancouver choose JDI

A whole-house remodel has more moving parts than any other project, which is exactly why design-build fits it so well: one team owns the design, the structure, the systems, and the finishes, so nothing slips through the gaps between separate companies. We handle the permitting, coordinate every trade against a single schedule, keep you updated through our client portal, and back the work with a five-year workmanship warranty. Based right here in Vancouver, we're close enough to be on-site and responsive across a project of this length — which, on a job that runs for months, is worth more than it sounds.

JDI Construction — "Built by family. Trusted by neighbors." Design-build remodeling based in Vancouver, WA, serving Vancouver, Clark County, and the greater Portland–Vancouver metro since 2007.